Telephone hotline of the Board of Trustees perfect dentures veneer, inlay, onlay, Crown, bridge, full dentures, dentures on implants, dentures made of ceramic, plastic, gold or non-precious metals: patients can choose from a wide range of forms of dental care. But which is appropriate in the particular case? The Board of Trustees of perfect dentures (KpZ) helps patients find the appropriate solution for their findings, and offers back telephone office hours this year. Tuesday, May 22, and on Tuesday, September 25th, each of 17 to 19: 00, the experts are available. On these two days, everyone has the opportunity to obtain an independent expert opinion on the subject of Dental restorations. The supply of dental prostheses is an individual matter for the many aspects must be observed. Therefore, it is important to inform themselves well in advance of treatment. First of course with my own dentist and demand among neutral experts, Professor Hans-Christoph Lauer explained. As Director the Scientific Advisory Board of the KpZ offers the possibility of patients together with a team of dental professionals and dental technicians, sound information to obtain and explained the different power supplies.

Detailed information will help the experts who is consulting for the experts helpful, if the patients on the phone documents to their current situation of dental and / or to the planned provide dental care, to the example the treatment and cost plan. And another tip for the caller: best advance to record the most important questions. One never forgets, then all points that are important, can discuss with the experts, recommends Dr. Karin Uphoff, head of the Marburger press centre of the KpZ. The telephone consultations take place on Tuesday, May 22, and Tuesday, 25 September (day of dental health), from 5 to 7 pm.

Dental questions give Professor Lauer and more dentists and dentists under the 069 / 665586-44 information. Dental questions master dental technician under 069 / 665586-55 (Calls to the usual fixed network costs). Outside the hotline perfect dentures questions in writing to the Board of Trustees of their patients. Information about and around the topics of dentures and dental health:.

About the impact nozzles for fog systems equipment and fog systems are the heart of any fog line of type fog system fog nozzles. You spray water under high pressure, probably with 60 120 bar, and make fine water droplets, which to condense into fog. But what exactly happened and what fog nozzles should I use for the application? Fog, which is an element between air and water. It differs from the haze, which is much less dense and at a relative humidity of 80%. Fog, however, is formed when a saturation of the air with water, so at a relative humidity of more than 100%. Theoretically, the water contained in the air is not visible, as long as it is below the saturation limit. The property of air to absorb water is changed according to the existing air humidity and temperature.

We talk here indirectly by the dew point. With fog nozzles, the air is saturated with water, however, artificially. The finer the particle, the closer the Fog and the longer they stay in limbo. The fineness of the Nebula is dependent on the nozzle type and the mist system water pressure. There are two broad categories of nozzles. The pure fog nozzles have an impact pen, headed directly above the nozzle hole is. The hole diameter is approximately 100 microns.

Water now flows with high pressure and high speed through the hole and expands at the outlet. Thus, the water flows from the liquid phase to a gaseous phase, what commonly is called evaporation. It meets the water with more than 500 km/h out of the nozzle opening, being now on the top of the baffle post located directly above it. This frontal collision”, the water into fine particles is atomized now and there is fog. When nozzles without impact pin, the water particles are produced by the turbulence of the water flowing out.